Makita MAC5200 vs MAC2400

If you’re wont to air compressors, you almost certainly know that horsepower isn’t nearly as important as what proportion air it provides an air tank size. The cfm (cubic-feet-per-minute) rating means the difference between having enough atmospheric pressure to figure, or dalliance expecting the compressor to catch up to you. These two from Makita are all about having enough power for your tools while running as quietly and coolly as possible. Let’s check out them both and see which ones are going to be the simplest for you. In the choice between Makita MAC5200 vs MAC2400, you can pick one of these machines by reading our comparison based on features.

Makita MAC2400 Big Bore 2.5 HP Compressor

If you’re working with a partner, you’ll want two airline outlets. The MAC2400 offers that right up front. It holds 4.2 gallons of air in its twin tanks, and it provides 4.2cfm at 90psi. this is often precisely the sort of compressor needed for basic sprayers, caulk guns, air hammers, ¼” ratchets, and nailers.

The tank is formed of rugged forged iron, a durable feature that tons of pros wish to have. The compressor motor is protected by a compact roll cage with rubber feet and a cushioned carrying handle. Unfortunately, it weighs 77 pounds, quite a bit to haul around by hand.

What other specs make this an excellent compressor? the very fact that it operates at 79 decibels, which is quiet for this sort of machine, and below OSHA recommendations for all-day work. This feature is highlighted by the most satisfied users’ reviews. Makita says they made it quiet by reducing the motor rpm right down to 1730. That helps extend the lifetime of the motor.

Another way Makita protects the motor is with the large, round, automotive-style air cleaner that must be installed before the compressor’s first use. The filter is straightforward to access to wash or replace.

The oiling that the compressor pump requires also extends its life. there’s an oil sight glass to ascertain the extent and a drain valve for when it’s time to get rid of or change the oil. The air tanks even have a valve to empty the water that tends to condense inside them. The air tank drain valve is sort of a faucet to use, not the old-style font that needed pliers to open.

More features of the Makita MAC2400 compressor

  • Draws 12.3Amps of current, 2.5HP maximum power
  • Comes with a ¼” universal male coupler and a little bottle of oil
  • Makita offers a 30-day money-back guarantee and a 1-year limited warranty

Makita MAC5200 Big Bore 3.0 HP Compressor

If you’ve got larger power needs, like for framing nailers or ½” impact wrench, the MAC5200 could be what you’re seeking. It also provides air outlets for running two tools directly a bit like the MAC2400. the simplest part is that it’s rated for six .5cfm at 90psi. Run two framing nailers at once—it doesn’t care, and it keeps up. the highest atmospheric pressure it offers is 140psi.

Since the MAC5200 weighs even quite the previous compressor, Makita gave it a roll cage with two wheels within the back and rubber feet within the front. The rear handle extends therefore the compressor is often pushed or pulled sort of a dolly. The handle has four hooks for completing cord or hanging tools.

Like the MAC2600, this bigger compressor is additionally lubricated by oil, which suggests it’s an oil sight glass and a drain valve. The 5.2-gallon air tank also features a water drain valve that’s easy to use to urge condensation out before it rusts the forged iron. Makita made these two compressors as easy to take care of as possible.

Note that this compressor is significantly louder than the MAC2400. It operates at 90 decibels, so it might be best to wear ear protection or place it in another room.

More features of the Makita MAC5200 compressor

  • Weighs 88 pounds
  • Draws 13.8Amps
  • Comes with a ¼” universal male coupler and a little bottle of oil
  • Makita offers a 30-day money-back guarantee and a 1-year limited warranty

Conclusion

If you’ve got moderate power needs, like for basic sprayers, ¼” impact wrenches, or nailers, consider getting the MAC2400. It’s quiet enough to possess nearby, eliminating the necessity for long hoses. it’s a lower current draw and a compact design.

If you would like more power, like for ½” impact wrenches, speed saws, commercial sprayers, or framing nailers, consider getting the MAC5200. It’s heavier and noisier, but relatively easy to move because of the dolly-type setup.

LEAVE A REPLY

Please enter your comment!
Please enter your name here